Compact, portable and unique! The ZILOS-tk laser is integrated into the objective. The ZILOS-tk laser-objective is attached directly to the turret of the inverted microscope, leaving both the fluorescent and filter cube ports open for normal use. The ZILOS-tk is compatible with all current and older models of inverted microscopes. This patent pending design is unique in that all components required are contained in the single module. This allows the laser to be aligned under strictly controlled factory conditions and locked in place, so that alignment on-site is not required.

The ZILOS-tk features a 300 mW, 1460 nm, Class 1 laser and a pulse length as low as 1 microsecond, which is far lower than typical zona ablation procedures require.

Installs on Any Inverted Microscope

Since the ZILOS-tk laser is based on the standard objective height, it easily installs on turrets of all models of inverted microscopes, even older models. Also, the unique design of the laser allows unrestricted access to other installed objectives. And you can switch the ZILOS-tk laser from one brand of microscope to another - without need of physical laser realignment or customization.

Hands-free Laser Firing

When working with micromanipulators, the ZILOS-tk allows you to work in "hands-free" mode by using the optional foot switch to fire the laser. Simply use the manipulators to position the embryo to the target and press the foot switch to fire the laser. Your micromanipulation proceeds rapidly and the time the embryo spends on the microscope stage is minimized.

Free Your Microscope Ports

The HT lasers leave both the fluorescent light port and the filter cube port open for normal use (OOsight® compatible). Other laser systems use one of these ports to install their laser, which can interfere with full microscope functionality. The HT lasers are the only laser systems which don't require removal of the laser to use fluorescence.